Graphic

Connection dots

Symbol: Select in the list, the value (Never, Always or only when the symbol is connected to a wire) you want to display the dots placed where a wire connects to a symbol. You can also set the size and color of the dots.

Wire: The Display check box lets you display or not the dots placed on wire intersections where two wires form a connection. You can also set the size and color of the dots.

Line styles

Location: Defines the line type and color of the location outline.

Function: Defines the line type and color of the function outline.

Terminal strips: Defines the line type and color of the axis lines used when placing multiple terminals in a schematic.

Cable core: Defines the line type and color used in drawings to represent your cables cores.

Bridges: Sets the display parameters (color and line style) for the bridges in schematic pages (wire/bridge) . 

Equipotential conflicts: An equipotential conflict occurs when you connect two different equipotentials (equipotentials with a different number). This check box updates the control. You can also choose a line type and color for the line symbol.

Cable label: Defines the type and color of the line joining the cable to the cable label.

Nodal indicator

Automatically show nodal indicator: Check the box if you want to activate the nodal indicator. An oblique line materialize the cabling order between several components.

Oblique line size: Enter the line size materializing the nodal indicator. The value must be consistent with the distance between two wires.